Alfa Laval LKVF Coarse Strainer

The Alfa Laval LKVF is a hygienic coarse strainer engineered to remove 1–3 mm particles from process liquids before they reach pumps, membrane filtration units, valves, and other sensitive downstream equipment. By capturing solids at the inlet of critical sections, it reduces wear, plugging, and unplanned downtime in hygienic process lines.

Designed as a robust pump protection filter, the LKVF combines AISI 316 wetted construction with a clamped, handle-fitted filter element that lifts out for inspection and cleaning. Three perforation sizes — ø2, ø3.5, and ø5 mm — and five line sizes from 25 to 76.1 mm let engineers match retention to flow, while bidirectional flow capability simplifies awkward piping layouts.

It is specified across dairy, food, beverage, and brewery process lines wherever coarse solids must be removed without disrupting hygienic standards. Backed by Alfa Laval engineering and supplied in southern Germany through Euroflow as Alfa Laval Master Distributor, the LKVF is a measured, low-risk specification choice for plant teams protecting high-value equipment.

The Alfa Laval LKVF is a hygienic coarse strainer that sits inline upstream of pumps, membrane filters, control valves, and heat exchangers to intercept coarse particles before they cause damage. Its role is unglamorous but critical: keep 1–3 mm solids out of equipment that was never designed to handle them.

Inline coarse filter — how the LKVF protects pumps and membrane filtration

Liquid enters the strainer through the recommended inlet (A) and is forced through a perforated filter element. Particles collect on the inside of the element, where they remain contained until the next cleaning interval. When the handle points downward or the strainer is mounted horizontally, captured solids stay inside the element during removal, which keeps the surrounding area clean. Maximum product pressure is 1000 kPa (10 bar) on inlet A, with a full-vacuum minimum, giving designers comfortable headroom for typical hygienic process duties.

AISI 316 strainer construction and hygienic design

The housing comprises an inlet and outlet with the filter element fixed inside the flow path. The element itself is a perforated tube welded to a flange with a handle; the flange clamps onto a ferrule on the casing so the element lifts out without tools. Product-wetted steel parts are AISI 316 acid-resistant steel; other steel parts are AISI 304. The standard surface finish is semi-bright. EPDM is the standard seal material, with NBR or PTFE available where process chemistry or temperature demands an alternative. Operating temperature spans -10 °C to 140 °C with EPDM.

Flexible filter element selection: ordering hole sizes 1, 2, or 3 mm

At order, the filter element straining hole size is specified as 1, 2, or 3 mm. The corresponding filter element perforation table lists three actual perforation diameters: ø2.0 mm with 23% open area, ø3.5 mm with 30%, and ø5.0 mm with 33%. Smaller perforations retain finer particles; larger perforations preserve more open area for higher flow. Total strainer area is 430 cm² for the 25, 38, and 51 mm sizes and 840 cm² for the 63.5 and 76.1 mm sizes, giving designers two distinct surface-area bands to match line size and expected solids loading.

Bidirectional flow and easy cleaning

The perforated tube is engineered to withstand pressure drop in both flow directions, so the LKVF can be installed with inlet B as the entry point when piping geometry requires it. Maximum product pressure in that orientation is 700 kPa (7 bar). Clamp-off element removal supports the source-stated benefit of being easy to install and clean, reducing downtime for manual cleaning.

Specified through Euroflow as Alfa Laval Master Distributor for southern Germany, the LKVF is a low-risk component choice backed by Alfa Laval engineering and regional technical support. Pressure drop and capacity diagrams are available on request to confirm fit against expected duty points.

Sebastian Esche

Field Service Specialist

Sebastian is a Certified Master Brewer and Industrial Engineer with over 15 years of experience in the process and beverage industry. Throughout his career, he has worked in both technical leadership roles and in quality management and sales, giving him firsthand knowledge of the requirements of modern production facilities.

FAQ

In which regions does Euroflow operate?

What size range of particles does the LKVF inline coarse filter remove?

The LKVF removes coarse particles from 1 to 3 mm. Three filter element perforations are available — ø2.0 mm (23% open area), ø3.5 mm (30%), and ø5.0 mm (33%) — so retention can be balanced against open area depending on the expected solids and required flow.

Can the Alfa Laval LKVF be installed for bidirectional flow?

Yes. The perforated tube is designed to withstand pressure drop in both directions, so either side can act as the inlet. Inlet A is the recommended direction and supports up to 1000 kPa (10 bar); when inlet B is used, the maximum product pressure is 700 kPa (7 bar).

How do I specify the right LKVF for my hygienic process line?

When ordering, state the line size (25, 38, 51, 63.5, or 76.1 mm), the connection standard (DS, SMS, ISO, BS, or DIN male, ISO clamp, or welding ends), the filter hole size (1, 2, or 3 mm), and the seal material (EPDM, NBR, or PTFE). Pressure drop and capacity diagrams are available on request — request a quote or technical consultation from Euroflow as your Alfa Laval Master Distributor.

Call us

+49 721 / 470 518 - 10

Send a message

info@euroflow.de

Recover password