A hygienic valve is designed for easy cleaning and minimal contamination risk inside the product zone. An aseptic valve adds a hermetic barrier that seals the product zone from the surrounding atmosphere, so microorganisms cannot enter during sterile processing. Put simply, a hygienic valve keeps the inside clean, while an aseptic valve also keeps the outside out.
Valve specifications often use the two words interchangeably, and that habit causes real problems. A sterile process can end up with a valve that was never built to exclude outside microorganisms. A standard hygienic duty can end up paying for protection it does not need. Getting hygienic vs aseptic valves right at the specification stage protects both product safety and budget.
In this guide we explain how a single seat valve works, what a hygienic valve and an aseptic valve have in common, and the one addition that separates them. We then compare pressure, temperature and seal options, and finish with a simple rule for choosing. Two real valves serve as our worked examples, because together they show both protection levels on one platform.
How a single seat valve seals plug against seat
A single seat valve closes with one contact surface between the plug and the seat. Fewer sealing interfaces mean a lower contamination risk and simpler cleaning. Both hygienic and aseptic designs can be built on this principle. The difference lies in what protects the product zone from the outside.
- Open: the plug moves away from the seat, and product flows through the valve body.
- Closed: the plug returns to the seat, and the single contact surface between them isolates the flow path.
- Protected: the surrounding design decides how well the product zone is shielded. A hygienic valve relies on a smooth, crevice-free body and seals designed for cleanability. An aseptic valve adds a barrier between the product zone and the atmosphere.
The Alfa Laval Unique SSV Standard (hygienic) and the Alfa Laval Unique SSV Aseptic show this clearly. Both are pneumatic single seat valves with a single contact surface between plug and seat, and both are built on the Unique SSV platform. The Standard focuses on cleanability inside the product zone. The Aseptic keeps that focus and adds the outside barrier.
Shared platform, one-piece diaphragm and flush housing
Once you know how the seat works, the next question is what the two valves share and what physically makes one of them aseptic. The answer is mostly shared parts plus two additions. This is our 'same platform, one decisive barrier' view of the range.
What both valves share
- A smooth inner valve body without crevices, with a bright polished inside finish of Ra < 0.8 µm
- Product-wetted steel in 1.4404 (316L) and other steel parts in 1.4301 (304)
- A compact, modular design in a one- or two-body configuration, with the actuator connected by a yoke and all components assembled with clamp rings
- Defined seal compression, which extends seal life
- Static seal leak detection, which adds product safety
Because bodies, plugs, actuator and clamp rings are configured separately, we build each valve around the duty rather than treating it as a fixed unit. That modularity is also what allows the aseptic features to be added to the same base design.
The one-piece diaphragm seal
A diaphragm seal is a physical barrier that keeps the surrounding atmosphere out of the product zone. In the Aseptic, a one-piece diaphragm provides hermetic sealing against the intrusion of contaminants from the atmosphere. It protects the product against microorganisms and bacterial contamination during processing. On the Alfa Laval Unique SSV Aseptic Manually Operated, the diaphragm is PTFE on the product-wetted side, backed by EPDM.
Flush housing sterilization
The second addition is a flush housing that can be sterilized with steam. On the manually operated version, the maximum sterilization temperature is 150 °C at 380 kPa (3.8 bar) for short exposures of under one minute. Together, the diaphragm and the flush housing give sterile processing its extra layer of protection..
One modular platform
The aseptic diaphragm can also be used with the Unique SSV Standard, Tangential, Two Step, Manual and Tank Outlet variants. That shows the two protection levels sit on one modular platform rather than in unrelated product families.
Standard, Aseptic and manual variants with port counts
Within the Unique SSV range, three variants cover the hygienic and aseptic levels. They differ in protection, drive and port layout, as the table shows.
| Variant | Protection level | Shutoff ports | Changeover ports | Drive |
|---|---|---|---|---|
| Standard | Hygienic | 2 | Up to 5 | Pneumatic |
| Aseptic | Aseptic | 2 or 3 | 3 to 5 | Pneumatic |
| Aseptic Manually Operated | Aseptic | 2 or 3 | 3 to 5 | Manual |
A shutoff valve isolates a line, switching flow on or off. A changeover valve switches flow between lines. In changeover versions, the valve seat sits between the two bodies and is supplied for assembly.
- Alfa Laval Unique SSV Standard: this hygienic valve is available in sizes DN25 to DN100. It offers NO, NC and A/A actuators, a high pressure actuator option and protection against full vacuum through its double lip seal. It suits broad hygienic duties, for example a CIP-cleaned product line in Dairy processing.
- Alfa Laval Unique SSV Aseptic: this pneumatic valve adds the diaphragm seal and flush housing, and it comes in sizes DN25 to DN100. It suits sterile and aseptic duties, for example a sterile section in Pharmaceutical production.
- Alfa Laval Unique SSV Aseptic Manually Operated: this version comes as a shut-off, change-over, tank outlet or regulating valve. Its plugs have linear characteristics, so reducing the stroke reduces flow proportionally at unchanged pressure drop. It suits sterile process applications that call for a simple manual unit, for example a tank outlet in Biotechnology.
The pneumatic types can be fitted with ThinkTop V-series for sensing and control. The manual version can take ThinkTop V50 and V70.
Applications from dairy processing to pharmaceutical production
Hygienic duty covers a broad set of processes, and sterile duty extends that list. The table shows where each protection level is typically specified.
| Application | Standard (hygienic) | Aseptic |
|---|---|---|
| Dairy processing | Yes | Yes |
| Food processing | Yes | Yes |
| Beverage processing | Yes | Yes |
| Beer production | Yes | Yes |
| Biotechnology | Not listed | Yes |
| Pharmaceutical production | Not listed | Yes |
In hygienic duty, the priority is that cleaning reaches every product-contact surface, which is why a smooth, crevice-free body matters most. In sterile and aseptic duty, cleaning is only half of the requirement: microbial intrusion from outside must also be excluded. The Aseptic is built for uninterrupted production in these sterile and aseptic applications, and the Aseptic Manually Operated targets sterile process applications across the same six areas.
The sector alone does not decide the choice. A dairy plant may run hygienic valves on most product lines and still need aseptic valves in one sterile section. We therefore recommend specifying per duty, not per industry, and mapping each line to one of these two descriptions before choosing a valve.
Comparing hygienic and aseptic valves side by side
The table puts the Alfa Laval Unique SSV Standard and the Alfa Laval Unique SSV Aseptic next to each other on the points that most often decide a specification.
| Feature | Standard (hygienic) | Aseptic |
|---|---|---|
| Protection focus | Cleanability, low risk | Plus hermetic diaphragm seal |
| Max inlet pressure | 1000 kPa (10 bar) | 0-800 kPa (0-8 bar) |
| Temperature with EPDM | -10 °C to +140 °C | -10 °C to +140 °C |
| Other temperature data | TR2 +105 °C, TR3 160 °C | Flush housing 150 °C |
| Seal materials | EPDM, HNBR, FPM, TR2, TR3 | EPDM; HNBR or FPM option |
The pressure difference is the one buyers most often miss. The Standard is rated for 10 bar across DN25 to DN100, and the Aseptic for 8 bar across the same sizes. A duty with an inlet pressure above 8 bar therefore needs a careful review before an aseptic valve is specified. The TR2 (PTFE) and TR3 (PEEK) floating seals are Standard options, rated from -10 °C to +105 °C and from -10 °C to 160 °C respectively.
Several features are offered on the Standard: protection against full vacuum through the double lip seal, NO, NC and A/A actuators, a high pressure actuator option and a calculable pressure drop. If your product needs TR2 or TR3 seals, the Standard is the valve that offers them. The Aseptic offers low pressure, high product pressure, maintainable and 2 step/3 position actuators. The 2 step/3 position actuator is not available for DN/OD 25 or DN 25.
When to choose which
Choose an aseptic valve when microbial intrusion from outside must be excluded, as in sterile and aseptic processes. Choose a hygienic valve for broad CIP-cleaned duties, where it also gives you higher pressure capability and more seal options. Matching protection to the duty avoids paying for a barrier a standard hygienic line does not need, and it avoids under-protecting a sterile process.
When we compare hygienic vs aseptic valves with customers, we work through three questions:
- Must outside microorganisms be excluded from the product zone?
- What pressure and temperature does the duty see?
- Which seal materials does the product need?
If the answer to the first question is yes, the aseptic design is the starting point, and the other two questions then test whether its 8 bar rating and seal options fit. If the answer is no, the hygienic valve usually covers the duty with more headroom on pressure and a wider choice of seals.
Seal compression, leak detection and ThinkTop V-series indication
An aseptic barrier does not have to mean a complicated valve. Both valves have few moving parts, which supports easy maintenance, high reliability and low total cost of ownership. The modular, clamp-ring assembly keeps the valve straightforward to work on, whichever protection level you choose.
Defined seal compression extends seal life on both versions. Static seal leak detection adds product safety by making a seal problem detectable. On a line that is cleaned repeatedly, a seal that begins to fail should not go unnoticed, which is why we see leak detection as one of the most useful features on both the hygienic and the aseptic version.
ThinkTop V-series can be fitted to either pneumatic valve for sensing and control, so valve status stays visible whichever protection level you specify.
The semi-maintainable actuator comes with a 5-year warranty on both the Standard and the Aseptic. The Aseptic also offers a maintainable actuator option.
Specifying hygienic or aseptic protection: next steps
A hygienic valve is built for cleanability and low contamination risk. An aseptic valve adds a one-piece diaphragm as a hermetic barrier against the atmosphere, plus a flush housing that can be sterilized at 150 °C. The trade-offs are 8 bar against 10 bar maximum inlet pressure and different seal and actuator options. The deciding question is always whether outside microorganisms must be excluded.
- Both valves share the single seat design, a crevice-free body, 316L wetted parts and leak detection.
- The aseptic diaphragm seal is the decisive addition.
- The Standard is rated for 10 bar and the Aseptic for 8 bar.
- Specify per duty, not per industry.
Not sure whether your process needs hygienic or aseptic protection? As Alfa Laval Master Distributor for southern Germany, covering postal codes 66–99 and 07–08, we help system integrators, tank builders, plant engineers and end customers specify the right Unique SSV configuration. Our support covers body and port layout, seals, actuator and ThinkTop V-series indication. Contact our team to review your process conditions and get a tailored valve recommendation.